Use Your Soundbar; Adjust The Volume; Choose Your Sound; Play Audio Through Bluetooth - Sanyo FWSB415E Guide D'utilisation

Masquer les pouces Voir aussi pour FWSB415E:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5 Use your
SoundBar
This section helps you use the SoundBar
to play audio from connected devices.
Before you start
Make the necessary connections
described in the quick start guide and
the user manual.
Switch the SoundBar to the correct
source for other devices.

5.1 Adjust the volume

1
Press +/- (Volume) to increase or
decrease a volume level.
• To mute sound, press
remote control.
» When the mute on, the
POWER indicator on the front
panel of main unit blinks in red.
» When the mute off, the
POWER indicator stop blink
and light off.
• To restore the sound, press
again or press VOL +/-.
2
To increase or decrease volume, press
VOL +/- on remote control.
POWER
AUX
0
• When press VOL+, the indicators
on the front panel light up from left
to right.
• When press VOL-, the indicators
on the front panel light up form
right to left .
• All indicators on the front panel
blink twice when the volume is set
to either minimum or maximum.
10
EN
on
INPUT
LINE
OPTICAL
PAIR
32
Note
The volume might be influenced by MP3 or
Bluethooth player.

5.2 Choose your sound

Select predefined sound modes to suit
your video or music.
Press sound setting buttons on remote
control to select a sound mode.
» When a button is pressed, the
POWER indicator blinks once.
MUSIC: Recreate the original
recording environment of you music,in
the studio or at a concert.
MOVIE: Enjoy a cinematic audio
experience, specially enhanced for
movies.
NEWS: Hear every word with
optimized speech and clear vocals.
CLASSIC: Flat and pure sound
mode. Ideal for listening to classical
music.
5.3 Play audio through
bluetooth
Through Bluetooth, connect the SoundBar
with your Bluetooth device (such as an
iPad, iPhone, iPod touch, Android phone,
or laptop), and then device through your
SoundBar speakers.
What you need
A Bluetooth device which supports
version as 3.0 + EDR.
The operational range between the
SoundBar and a Bluetooth device is
approximately 10 meters (30 feet).
1
Press
on the remote control to
switch the SoundBar to Bluetooth
mode.
» The
PAIR INPUT
the front panel of main unit blinks
slowly.
indicator on

Publicité

Table des Matières
loading

Table des Matières