Setting Up Your Shelf System; Connecting The Power Cord - Insignia NS-A2113 Guide De L'utilisateur

# Description
5 DISC 2 button
6 DISC 3 button
7 SEARCH
8 PROG button
9 STOP button

Setting up your shelf system

Connecting the power cord

To use AC power:
1 Make sure that your local AC power source matches the voltage
shown on the plate located on the back of the system. If it does
not, consult your dealer or service center.
2 Connect the power cord to the AC connector on the shelf system,
then plug it into the AC wall outlet.
3 To switch the shelf system off completely, unplug the power cord
from the AC wall outlet.
Caution
10
/
buttons
Unplug the power cord from the AC wall outlet during heavy
thunderstorms to protect your shelf system.
www.insignia-products.com
Insignia NS-A2113 Mini-Shelf System
Function
Press to play disc 2 in the CD changer.
Press to play disc 3 in the CD changer.
Press to fast reverse or fast forward a disc to
search for a selection.
Press to program CD playback.
Press to stop playback of a disc.