Auto Program - Cameo ZENIT W300 Manuel D'utilisation

AUTO MODE (programme 1 - programme 6)
The 6 different auto-programmes each comprise non-editable color-change sequences. Brightness and speed are independently adjustable.
Select auto mode as per the procedure previously described in SETTING STAND ALONE MODE and confirm with ENTER. Using the UP and DOWN
controls, now select one of the 6 auto-programmes (observe arrow) and confirm with ENTER. To adjust brightness, use the UP and DOWN
controls to select the menu item "Dim", and confirm with ENTER, then use the UP and DOWN controls to select the desired value between 000
and 255. Confirm with ENTER. Set the run speed by selecting the menu item "Speed", confirm with ENTER, and then select the desired value
between 001 and 100. Confirm with ENTER. Press MODE four times to return to the main display (Mode Auto).
----------- Stand Alone -----------
Auto
Color Macro
Static
Tunable White
User Color
Timer
Color MACROS (Color Macro)
15 different preset color macros are available. Select color macro mode as per the procedure previously described in SETTING OPERATION
MODE and confirm with ENTER. Using the UP and DOWN controls, now select the desired color preset (observe arrow) and confirm with ENTER
(Color Off = blackout). The display will show a three-digit number field and you can use the UP and DOWN controls to set the desired brightness
between 000 and 100. Confirm with ENTER. Press MODE three times to return to the main display (color macro mode).
----------- Stand Alone -----------
Auto
Color Macro
Static
Tunable White
User Color
Timer
STATIC MODE (Static)
The static mode allows the Dimmer, Strobe, R, G, B, W to be adjusted directly on the device with values between 000 and 255, in a similar
way to with a DMX controller. In this way, an individual scene can be created without an additional DMX controller. Select static mode as per
the procedure previously described in SETTING OPERATION MODE and confirm with ENTER. Using the UP and DOWN controls, now select
the menu item that you wish to edit (observe arrow) and confirm with ENTER. The display will show a three-digit number field and you can
use the UP and DOWN controls to configure the desired value between 000 and 255. Confirm with ENTER. Press MODE three times to return
to the main display (static mode).
----------- Stand Alone -----------
Auto
Color Macro
Static
Tunable White
User Color
Timer
8
---------------- Auto ----------------
Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
---------- Color Macro ----------
Color Off
Red <100>
Amber <100>
Yellow Warm <100>
Yellow <100>
Green <100>
Turquoise <100>
Cyan <100>
---------------- Static ----------------
Dimmer <255>
Strobe <255>
Red <255>
Green <255>
Blue <255>
White <255>
----------- Programme x -----------
Dim <255>
Speed <100>
Dim Speed
000 001
– –
255 100
Blue <100>
Lavender <100>
Mauve <100>
Magenta <100>
Pink <100>
Warm White <100>
White <100>
Cold White <100>
000
Mode
–
Static
255
001
Mode
–
Auto
100
000
Mode
–
Color Macro
100