10.0 Guarantee
The warranty period for new Wolff machines shall last for
one year from the point at which the machine is transfer-
red / delivered to the customer, insofar as statutory legal
requirements do not stipulate otherwise.
When validating warranty claims, the invoice or proof of
purchase must always be submitted.All repairs within the
framework of the warranty agreement must be underta-
ken by a service Centre that has been accredited by us.
Customers performing their own repairs and/or improper
repairs regularly lead to the exclusion of warranty claims.
The same also applies to incorrect operation and/or use.
Replacement of parts, accessories and other modifi -
cations to Wolff machines
Users of Wolff machines enjoy a high level of safety
and reliability of their machine. In order to maintain this
status quo, your Wolff tool may not be modifi ed from the
condition in which it is delivered without following the
rules below.
These rules apply to both the replacement of parts and
equipping the machine with accessories as well as other
technical modifi cations.
All work undertaken to your Wolff machine must be
undertaken exclusively by a workshop that has
suitably trained and experienced personnel at its
disposal, as well as the requisite work equipment.
We recommend using authorised service Centre.
In the event of planned replacement of parts, plan
ned addition of accessories or other planned techni
cal modifi cations, an assessment must always be
carried out by an authorised service Centre or us,
as manufacturer, before work is commenced.
It is highly recommend that only safety-approved
Original Wolff replacement parts and Original
Wolff accessories are used, which have been
approved by us, as manufacturer. Replace-
ment parts and accessories can be obtained
from your authorised service Centre, which will
also be able to undertake professional installation on
your behalf. Original Wolff replacement parts and
Original Wolff accessories have been checked
for safety and suitability especially for Wolff
machines.
Wolff GmbH & Co KG | D-74360 Ilsfeld | Ungerhalde 1 | Fon: +49 (0)7062-91556-0 | Fax: +49 (0)7062-91556-41 | www.wolff -tools.de
19
We are unable to adequately assess the safety and suita-
bly of non-Original Wolff replacement parts.
In order to preserve operational safety and to prevent
damage in the event of technical modifi cations, of
whatsoever nature, our technical guidelines must
always be observed. We are also always happy to
hear from you should you have any other questions
about your Wolff machine.
Please note that we cannot accept any liability for dama-
ge, insofar as this is sustained as the result of incorrect
work undertaken or as the result of violation of the rules
stated above.