Warranty - Baier BFS 7936 Traduction Du Mode D'emploi Original

13

Warranty

The products placed on the market and distributed
by Maschinenfabrik OTTO BAIER GmbH take into
account the regulations of the laws concerning engi-
neering tools and equipment to protect against risks
to health and safety.
We guarantee the perfect quality of our products
and accept the costs of subsequent repairs by
replacing the damaged parts or replacement with
a new tool in case of design, material and/or man-
ufacturing errors within the warranty period. The
warranty period for commercial use is 12 months.
The following are prerequisite for a warranty claim
due to design, material and/or manufacturing errors:
1. Proof of purchase and compliance with the
instruction manual
A mechanically produced original copy of a
purchase voucher must always be submitted in
order to make a warranty claim. It must contain
the complete address, date of purchase and
type designation of the product.
The instruction manual for the respective ma-
chine / the respective equipment and the safety
instructions must have been complied with.
Damage due to faulty operation cannot be
recognised as a warranty claim.
2. Correct use of the machine / equipment
Maschinenfabrik OTTO BAIER GmbH's prod-
ucts are developed and produced for specific
purposes.
A warranty claim cannot be acknowledged in
the event of failure to comply with the intended
use in accordance with the instruction manual,
misuse or use for another purpose or use of
unsuitable accessories. The warranty does not
apply if the machine / the equipment is deployed
in continuous and piece-work operation or for
rental and hire purposes.
3. Compliance with servicing intervals
Regular servicing by us or a servicing and
repair firm authorised by us is prerequisite for
warranty claims. Servicing is specified for when
the carbon brushes are worn, however at least
once a year.
The machine / the equipment must be cleaned
in accordance with the provisions of the
instruction manual. All warranty entitlements
expire in case of intervention/tampering with the
machine/equipment by third parties (opening the
machine).
Servicing and cleaning work are not generally
covered by the warranty.
4. Use of original BAIER spare parts
Ensure that original BAIER spare parts and
BAIER accessories only are used. They are
available from authorised dealers. The type
and quantity of grease are to be used according
to the valid grease list. Use of non-original
parts can cause consequential damage to the
machine and an increased risk of accidents.
Dismantled, partly dismantled machines and
machines / equipment repaired with third party
spare parts are excluded from the warranty.
5. Wearing parts
Certain components are subject to use-induced
wear or normal wear and tear caused by use of
the respective power tool. These components
include, among other things, carbon brushes,
ball bearings, switches, power cords, seals,
shaft sealing rings. Wearing parts are not
covered by the warranty.
| 27 |