Features; Installation Instructions - Danby DCR047A1BBSL Guide D'utilisation Et D'entretien

Installation Instructions

LOCATION
• Select a place with a strong, level fl oor.
• Remove exterior and interior packaging, wipe the outside with a soft, dry cloth and the inside with
a lukewarm, wet cloth.
• Avoid placing the unit in a narrow recess or near any heat source, direct sunlight or moisture.
Direct sunlight could damage the unit. Heat sources nearby will cause higher electricity
consumption.
• Avoid moist places. Too much moisture in the air will cause frost to form very quickly on the
evaporator, and your refrigerator will have to be defrosted more frequently.
• This unit is 48.5 cm (19 in) wide, 122.5 cm (48 in) tall and 56 cm (22 in) deep. Ensure that there is
a minimum of 12.7 cm (5 inches) of space between the unit and all surrounding walls.
• Do not cover any of the ventilation openings with any material as the unit needs adequate space
to breathe.
INSTALLATION
Important notes:
• This appliance is intended for free-standing installation only and is not intended to be built-in.
• This appliance is approved for indoor use only and is not intended for outdoor operation.
• Allow the unit to stand upright and undisturbed for 4 hours before plugging in for the fi rst time to
allow the collant to settle and reduce the possibility of malfunction in the cooling system due to
transport handling.
Levelling legs
This unit has two levelling legs on the front. To level the
unit, tighten both feet until the top of the foot is against the
bottom of the chassis. Slowly unscrew one of the feet until
the unit is level.

FEATURES

1. Freezer compartment
2. Freezer shelf
3. Temperature control with integrated
interior light display
4. Refrigerator shelf
5. Crisper with glass cover
6. Leveling legs
7. Freezer door shelf
8. Refrigerator door shelf
9. Refrigerator large capacity door shelf
4