Removing The Toilet Lid; Replacing The Shower Nozzles - TECE One Mode D'emploi

Removing the toilet lid

ƒ Lift up the toilet lid and toilet seat.
ƒ Remove both set screws from the hinges (D) using an Allen key (2.5 mm).
ƒ Hold the toilet lid and seat with both hands and pull them gently upwards.
Note: During assembly, after mounting both hinges, press down on the attach-
ment bolts – at the same time, applying slight pressure – until they audibly click
into place.

Replacing the shower nozzles

The scope of delivery includes three shower nozzles (standard 75°). To replace
them, proceed as follows:
ƒ Turn the water flow regulator until the shower arm extends a little.
ƒ Pull out the shower arm with your hand and turn off the water supply (G).
ƒ Hold the shower arm firmly with one hand and with the other, pull the nozzle
forwards until it comes off the shower arm (H).
ƒ Then push your chosen shower nozzle – with the opening pointing upwards
– onto the shower arm until it gently locks into position.
As an option, additional shower nozzles can be ordered which differ from each
other in terms of the intensity and position of the shower spray (see "Spare
parts" section).
EN
15