Environmental Protection; Declaration Of Conformity - Würth ESS 115-2 Traduction Des Instructions D'origine

Environmental protection

Do not dispose of the device with
domestic waste. Have the device
disposed of by an authorised waste
management company or your
municipal waste management
organisation. Adhere to the applica-
ble regulations. In case of doubt
contact your waste management organisation.
Recycle all packaging material in an environmen-
tally friendly manner.
Warranty
This Würth device is covered by warranty according
to the applicable national regulations. The warranty
period begins on the date of purchase (please retain
invoice or delivery note as proof of purchase).
Faults covered by warranty shall be eliminated by
replacement or repair. Damage caused by improper
operation is not covered by warranty.
Claims can be recognised only if the device is in a
non-disassembled state and presented to a Würth
branch office, your Würth sales representative or a
customer service office authorized by Würth.
Technical changes reserved.
We accept no liability for printing errors.
Spare parts
In the unlikely event of a failure or defect, have
the device repaired by a Würth masterService
workshop.
In all your queries and spare part orders, always
quote the product number (see type plate) of your
device. The current spare part list of the device can
be viewed online at http://www.wuerth.com/parts-
manager. Alternatively, contact your local Würth
agency for a hardcopy.
12

Declaration of Conformity

We herewith declare that this product conforms with
the following standards and directives:
Standards
• EN 60745-1:2009 + A11:2010
• EN 60745-2-4:2009 + A11:2011
• EN 55014-1:2006 + A1:2009 + A2:2011
• EN 55014-2:1997 + A1:2001 + A2:2008
• EN 61000-3-2:2006 + A1:2009 + A2:2009
• EN 61000-3-3:2008
• EN 50581:2012
in accordance with the regulations stipulated in the
directives:
EC directive
• 2014/30/EC
• 2006/42/EC
• 2011/65/EU
Technical documentation with:
Adolf Würth GmbH & Co. KG, Abt. PPT
Reinhold-Würth-Straße 12 – 17,
74653 Künzelsau, GERMANY
F. Wolpert
Authorized Signatory,
Head of Product Ma-
nagement
Künzelsau: 16.06.2016
Dr.-Ing. S. Beichter
Head of Quality,
Authorized Signatory