Disconnecting Your Bluetooth Device - Sangean SG-118 Mode D'emploi

NOTE
● If there are 2 Bluetooth devices searching for SG-118, it will show its availability on both
devices. However, if one device links with the SG-118 first, then the other Bluetooth device
won't find the SG-118 on its list.
● If you take your source device out of range, the connection will be temporarily disconnected to
your radio. Your radio will automatically reconnect if the source device is brought back in range
within 3 minutes. Otherwise you need to manually reconnect your device again to the radio. Be
aware that during the period of disconnection, no other Bluetooth device can pair or link with
your radio.
● If 'SANGEAN SG-118 shows in your Bluetooth device list but your device cannot connect
with it, please delete the Sangean SG-118 item from your list and pair the device with the
SG-118 again following the steps described previously.
● The effective operation range between the SG-118 and your paired device is approxi-
mately 10 meters (30 feet). Any obstacle between the system and the device can reduce the
operational range.
● Bluetooth / NFC connectivity performance may vary depending on the connected Bluetooth
devices. Please refer to the Bluetooth capabilities of your device before connecting to your
radio. All features may not be supported on some paired Bluetooth devices.
● With some mobile phones, making / receiving calls, text messages, e-mails or any other
activities unrelated to audio streaming may mute the Bluetooth audio streaming or even
temporarily disconnect from your device. Such behavior is a function of the connected device
and does not indicate a fault with your radio.
Playing a previously-paired Bluetooth source device
The SG-118 can memorize up to 2 paired Bluetooth source devices, when the memory exceeds this
amount, the earliest paring device will be over written from the device.
If your Bluetooth source device was already paired with the SG-118 previously, the unit will memorize
your Bluetooth source device and will attempt to reconnect with a Bluetooth source device in the
memory that was last connected. If the last connected Bluetooth source device is not available, the
SG-118 will try to connect to the second last Bluetooth source device.

Disconnecting your Bluetooth device

Rotate the Band selecting knob to any other band or off position or disconnect the Bluetooth-enabled
device. The LED light for Bluetooth icon will then start to flash indicating deactivation of Bluetooth.
09