Operating Your Radio - Sangean H201 Mode D'emploi

Operating your radio

Your radio is equipped with three tuning methods – Manual Tuning,
Search tuning and Memory preset tuning.
Manual Tuning
1. Press the Power button to turn on the radio.
2. Select the required waveband by repeatedly pressing the
Band button. For FM waveband, pull out and extend the
FM wire antenna located in the battery compartment to
get best reception. For MW ( AM ) waveband, rotate the
radio for best reception.
3. A single press on either Tuning up or Tuning down buttons will
change the frequency in the following increments:
FM: 100 or 200 kHz ( USA version )
50 or 100 kHz ( standard version )
AM ( MW ): 9 or 10 kHz
4. When the waveband end is reached, the radio will continue tuning
from the opposite waveband end.
5. Press the Volume Up/Down buttons to the required level.
6. To switch off your radio, press the Power button. The display will
show OFF.
5