Sulzer XRW 750 Instructions De Montage Et D'utilisation page 7

1. Lightly grease propeller boss and shaft end.
2. Push on propeller (3/6).
3. Fit o-ring (3/5).
4. Insert propeller washer (3/2).
5. Fit o-ring (3/4).
6. Fit lock washers (3/3) taking care that orientation is correct
7. Tighten socket head screw (3/1) with torque of 56 Nm.
5.3 Tightening torque
See chapter 8.2 of the Installation and Operating Instructions 15972513-EU.
5.4 Installation example XRW 750
We recommend that the closed bracket be used for this type of installation.
6
5
5.5 Brackets XRW
See chapter 8.5 of the Installation and Operating Instructions 15972513-EU.
5.6 Guide tube lengths (square tube) XRW
See chapter 8.6 of the Installation and Operating Instructions 15972513-EU. XRW 750 = XRW 900.
5.7 Electrical connection
See chapter 9 of the Installation and Operating Instructions 15972513-EU.
6 - 7 Commissioning; Maintenance
See chapter 12 - 13 of the Installation and Operating Instructions 15972513-EU.
EN 1585-A
1
2
3
4
Figure 4 Installation example XRW 7511
Legend
1 Hoist with winch and rope
2 Upper bracket with locking plate
3 Closed bracket
4 Bottom plate
5 Safety stop clamp
6 Swivelling square guide tube
7 Cable clamp with cable hook
7