Lets Get Started - Logitech HARMONY PRO 2400 Guide D'installation

Lets Get Started

Harmony Hub
Harmony Pro 2400 Hub can be placed in any unobstructed
location where IR signals can be transmitted to AV equipment
It can also be placed in cabinets using 3 5mm IR emitters or
3 5mm male to male cables positioned properly and connected
to the hub
6 English
Properly positioning the hub
Power Options
Harmony Pro 2400 hub can be powered by the
included AC adapter, or a PoE connected Ethernet
cable When using a PoE connected Ethernet
cable, the AC adapter is not required
Once plugged in, the hub takes approximately
30 seconds to power up The LED will glow red
initially, then flash red when ready to pair with
your BT enabled mobile device Once it has
successfully been connected to a Harmony
account the LED will glow green (Step 3)
STEP 1
Charging station Harmony Pro 2400 Remote