JMA BT MULTIUSER PRO Manuel D'utilisation page 31

administrators and
invitations, a factory reset
must be performed (the
copies made on the remote
will also be deleted). The
process is as follows:
Hold buttons 1 and 2 at
the same time until the red
LED flashes and wait for
the LED to switch off.
Hold buttons 1 and 4 on the
remote control at the same
time for three seconds.
The "Check" option allows
to know the free and used
administrator licenses.
The physical buttons of
the M-BT remote control
are disabled as soon as
it is connected to the BT-
MULTIUSER BOX and starts
to be used. If you want
to re-enable the M-BT
buttons so you can use it
as a remote, choose the
option "Administrators>
Enable physical buttons".
Only users with the
administrator role can
choose this option.
3.2 Managing Guest
Licences
The screen showing the
list of remote controls also
shows the various remote
controls linked to each
administrator or guest user.
The remote control
description includes
the number of available
licences that can be
issued to guests and this
can be accessed as the
administrator by pressing
the user button.
31