JMA BT MULTIUSER PRO Manuel D'utilisation page 25

A new screen will open
instructing you to press the
four physical buttons on
the M-BT remote control to
begin the linking process if no
administrator is already linked.
You need to hold the four
buttons at the same time until
the green LED on the M-BT
remote control starts to flash.
If it does not start to flash, it
may be because the remote
control has no free licences. If
an administrator already exists,
he/she should use the "Add
administrator" option from the
"Administrators" menu.
See LICENCES under Section
3 for more information.
When the M-BT remote
control starts to flash green,
release the buttons and
the M-BT remote control
you have started to link will
appear in the app.
Select the device on your
screen and the linking
process will begin. A screen
will be displayed for entering
a name and logo that you
want to use for the remote
control being linked. (See
screenshot on the following
page).
25