General Notes - geo-FENNEL GeoDist 100 Mode D'emploi

GENERAL NOTES

· After 3 minutes without operation the instruments powers off auto-
matically.
· The instrument automatically saves the last 1.000 measured values.
· The integrated tilt sensor 360° is always active.
· In all measuring modes (except single and continuous measurement)
the red line shows which parameter will be measured next. The
green
L shows the parameter to be determined.
CAMERA FUNCTION
camera
function
Press to activate the camera function in
all measuring modes, in case the target is not
visible with the eye - especially in case of
outdoor measurements.
= zoom in/out
Start the measurement with
EN
.
31