Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY STEP 2
ALL
BOLT (A)
MoDELS
20 mm
Qty: 4
RUNNING DECK
8
HArDWArE BAG 2 CONTENTS :
SPRING WASHER (B)
15 mm
Qty: 4
BASE FRAME
Open hardware bag 2.
A
Pull lead wire through right console
B
FLAT WASHER (C)
mast. After pulling the lead wire through the
15 mm
mast, the top of the console cable should
Qty: 4
be located at the top of the mast. Detach and
discard the lead wire.
With the running deck in the raised
C
position, attach the right console
LEAD WIRE
mast to the base frame using 4 bolts
(a), 4 spring washers (b) and 4 flat
washers (c).
CONSOLE CABLE
RIGHT CONSOLE MAST
BOLTS (A)
SPRING WASHERS (B)
FLAT WASHERS (C)
NOTE: Be careful not to pinch any wires
while assembling the right console mast.
Publicité
