Operating Instructions - brennenstuhl TRX 3500 Mode D'emploi

PMR Walkie-Talkie TRX 3500
2.2. Displays
Channel number: a user-selected channel between 1 and 8
Battery level
Displays if automatic channel search has been activated
Displays if key lock has been activated
Displays when a signal is being transmitted
Displays when a signal is being received
Shows the current volume setting
3. OPERATION
3.1. Belt Clips
Removing the Belt Clip
Pull the belt clip locking mechanism away from the walkie-talkie (PMR).
Push the belt clip upwards while pulling the belt clip locking mechanism, as shown in Fig. 1.
Attaching the Belt Clip
Push the belt clip into the slot, as illustrated in Fig. 2.
You will hear a ‚click' when the belt clip snaps into place.
3.2. Inserting the Batteries
The PMR walkie-talkie requires 3 AAA alkaline batteries.
Unlock and remove the cover of the battery compartment.
Insert 3 AAA alkaline batteries. Make sure the positive and negative ends are facing the correct
direction, as shown in Fig. 3.
Replace the battery compartment cover. See Fig. 4.
Fig. 1
Note
Only use batteries of the same type and brand in your PMR walkie-talkies.
Do not mix old and new batteries.
Remove the batteries if you will not be using the devices for a long time.
BA_PMR_Walkie_Talkie_TRX_3500_0486178_150528.indd 9
Fig. 2 Fig. 3

Operating Instructions

Fig. 4
D
9
28.05.15 15:37