Rear Panel - BST Pro UPX-4120 Manuel D'utilisation

UPX-4120
6. ZONE MONITOR SELECTOR
Use this button to send the selected zone to the monitor output.
7. ZONE VOLUME CONTROL
Use this button to adjust the output signal level for each zone (Z1-Z5).
8. POWER BUTTON
Press the power switch to turn the unit on. To switch the POWER off press the POWER switch again.
9. POWER INDICATOR
When the power is on, the indicator are on.
10. TREBLE CONTROL
Use this button to adjust the treble tone of the signal for each input (CH1-CH5)
11. BASS CONTROL
Use this button to adjust the bass tone of the signal for each input (CH1-CH5)
12. INPUT VOLUME
Use this knob to adjust the input level for each input (CH1-CH5)
13. MP3 PLAYER
MP3 Player, switch the player on and put a USB or SD Card on the slot in.
.

REAR PANEL

1. POWER SOCKET
Used to connect the AC mains power to the unit.
2. TELEPHONE INPUT
Telephone DIP switch selector and level input control.
3. CH5 INPUT
RCA input, connect in this input your Line stereo cable and adjust the signal level of the input CH5.
4. CH4 INPUT
RCA input, connect in this input your Line stereo cable and adjust the signal level of the input CH4.
5. CH3 INPUT
Combo input, connect in this input your XLR or JACK cable, select the device (LINE, PHANTOM, MIC) and adjust the signal level of the
input CH3.
6. CH2 INPUT
Combo input, connect in this input your XLR or JACK cable, select the device (LINE, PHANTOM, MIC) and adjust the signal level of the
input CH2.
.
© Copyright LOTRONIC 2013
BSTDJ.COM
Page 8