Oase BioSmart 5000 Notice D'emploi page 4

- English -
Installation
1. Lay the outlet pipe for the water outlet into the pond and the
2.
adapter to keep the adapter from falling off outlet.
3.
ground.
carry out work on the unit.
follow the steps in the Vitronic manual for
4.
the pump outlet; avoid bends and lay well protected.
corresponding mark depending on the hose size being
used.
5. Push and turn the hose onto the open stepped hose nozzle
and secure with a hose clamp.
6.
nozzle
water inlet
inside ensuring that the opening points downward.
Lay the hose so that it cannot be stepped on, avoid kinks.
1.
2.
3.
4.
stepped hose
5.
6.
O-ring
4