SOLAC ID7840 Mode D'emploi page 14

Hydropulseur
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
This symbol means that in case you wish
to dispose of the product once its working
life has ended, take it to an authorised
waste agent for the selective collection of Waste
from Electric and Electronic Equipment (WEEE).
This symbol means that product may in-
clude a battery or batteries; user must to remove
them before disposing of the product. Remember
that batteries must be disposed of in duly authori-
sed containers. Do not dispose of them in fire.
- How to remove the batteries from the interior of
the device:
- CAUTION: It is important that the batteries are
fully discharged prior to its withdrawal from the
apparatus.
- To remove the batteries, once the life of the
appliance, proceed as follows:
- Remove the water tank (H).
- Remove the fixing screws on the bottom part of
the appliance with a screwdriver (Fig. 6).
- Remove the fixing screws on the upper part of
the appliance with a screwdriver (Fig. 7).
- Remove the lower cover and push on the inner
body to extract it from the upper part of the
appliance.
- Remove the housing that protects the battery
and motor with a screwdriver.
- Identify the battery wires and cut their (Red and
Black). To avoid risks of a short circuit with a
possible residual battery load, first cut the Red
wire and protect it by using insulating tape, then
proceed to cut the Black wire proceeding in the
same way.
- Safely remove the battery from its housing.
This appliance complies with Directive 2014/35/
EU on Low Voltage, Directive 2014/30/EU on
Electromagnetic Compatibility, Directive 2011/65/
EU on the restrictions of the use of certain
hazardous substances in electrical and electro-
nic equipment and Directive 2009/125/EC on
the ecodesign requirements for energy-related
products.

Publicité

Table des Matières
loading

Table des Matières