Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Product description, Assembly
3.2
Intended use
The Wireless Unit integrates CMC III VX radio comfort handles and wireless sensors in the base
EN
system. A base system can be a CMC III Processing Unit (DK 7030.000), a Rittal IoT Interface
(SK 3124.300) as well as a Rittal PDU (DK 7979.xxx, other than PDU basic). Up to eight Wireless
Units may be registered for each CAN bus channel of the base system.
Note:
The Wireless Unit is a radio system. The unit may be operated only in those countries
in which the performed radio approvals are valid. Deployment of this unit in other coun-
tries/regions is not permitted.
3.3
Scope of delivery
– Wireless Unit
– Accessories supplied loose (fig. 1)
– Installation and Short User Guide
3.4
Technical specifications
Technical specifications
EU version
North America version
Identification number DK 7030.691
Internal radio module
Transmission frequency
Transmission power
Range
Dimensions (W x H x D)
The Wireless Unit may only be operated under the following operating conditions:
Operating condition
Temperature operational range
Humidity operational range
Degree of protection
4
Assembly
4.1
Assembly instructions
The assembly of the Wireless Unit is made as shown in fig. 2.
10
Wireless Unit
DK 7030.690
DK 7030.691
FCC ID (USA): SZV-TMC515U
ISED IC (Canada): 5713A-TMC515U
EnOcean TCM 515 (DK 7030.690)
EnOcean TCM 515U (DK 7030.691)
868.3 MHz (DK 7030.690)
902.875 MHz (DK 7030.691)
10 mW (+10 dBm), modulation type ASK (DK 7030.690)
1.26 mW (+1 dBm), modulation type FSK (DK 7030.691)
typ. 10 m (up to 30 m in buildings, depending on the
environmental conditions)
138 x 40 (1 U) x 120 + 12 mm front assembly
Wireless Unit
+5 °C to +55 °C
5% to 95% relative humidity, non-condensing
IP 30 in accordance with IEC 60 529
Rittal CMC III Wireless Unit
Publicité
Table des Matières
