Control Panel - Buffalo CM289 Mode D'emploi

UK
INSTALLATION
Note: If the unit has not been stored or moved in an upright position, let it stand
upright for approximately 12 hours before operation. If in doubt allow to stand.
1. Remove the appliance from the packaging and remove the protective film from all surfaces.
2. To optimize performance and longevity, ensure a minimum clearance of 2.5cm is maintained between
the unit and walls and other objects, with a minimum 5cm clearance on the top. NEVER LOCATE
NEXT TO A HEAT SOURCE.
GETTING TO KNOW YOUR ICE CREAM MAKER
Removable bowl

Control panel

Housing
Bottom plate
Control Panel
Display
4
CM289_ML_A5_v4_20210705.indb 4 CM289_ML_A5_v4_20210705.indb 4
Power Start/Pause
Transparent lid
Mixing blade
Top lid
Time setting button
2021/7/5 16:48 2021/7/5 16:48