Graco ENDURE Manuel D'utilisation page 8

28 Place the vehicle seat belt across the child and child restraint
making sure that the diagonal vehicle seat belt goes
through the vehicle seat guide in the headrest as indicated
with the red tag. -1
28
Ensure that the lap strap portion of the harness is located as
low as possible towards the thighs - not around the tummy.
28 -2
Place the vehicle seat belt under the armrest closest to the
buckle as indicated with the red tag. -3
28
29 Fasten the vehicle seat belt into the seat belt buckle making
sure the vehicle seat belt and the buckle are in line with
each other as indicated with the red tag.
30 Finish by tightening the vehicle seat belt until there is no
slack and the child and child restraint are held firmly in
place.
Make sure the seat belt has not become twisted.
Also check that the cover is not impeding the movement or
fit of the vehicle seat belt in any way.
Accessories (on select models)
31 Body Support-
Body support must be used if shoulders are below the
lowest harness setting.
Never allow body support to bunch or fold behind child. To
remove, unbuckle the buckle and pull out the body support.
32 Headrest Pillow-
To remove, pull the pillow out.
13 14