Filter check button
5
After 250 hours of operation, the air filter must be cleaned; the "clean filter" indicator
light will turn on.
Note: Once filter has been cleaned, press Filter check button to clear the warning.
The "clean filter" indicator light will turn off.
If the unit has not been used for more than 3 months, please check and clean
the filter before operating air conditioner.
/
button
6
Under temperature setting mode, each push on the "
will increase or decrease by 1°C. Temperature setting range:16°C/60.8°F~
30°C/86°F.Under timer setting mode, each push on the"
increase or decrease time by 0.5 hour or 1 hour increments.
Display
7
1. When the operation mode is Auto, Cool, Energy saving or Dry mode (without
timer) setting, set temperature will be displayed.
2. When the operation mode is Fan mode (without timer), ambient temperature
will be displayed.
3. Time will be displayed under timer setting or timer preview.
Operation Guide
20
" or "
" button,
" or "
" button, will