CONTENTS | OPERATION
GENERAL INFORMATION
OPERATION
1.
General information ������������������������� 8
1.1
Safety information ��������������������������� 8
1.2
Other symbols in this documentation ������������ 8
1.3
Units of measurement ������������������������ 8
2.
Safety ������������������������������������� 8
2.1
Intended use �������������������������������� 8
3.
Operation ���������������������������������� 9
4.
Troubleshooting ���������������������������� 9
INSTALLATION
5.
Safety ������������������������������������� 9
5.1
General safety instructions ��������������������� 9
5.2
Instructions, standards and regulations ���������� 9
6.
Product description �������������������������� 9
7.
Standard delivery ��������������������������� 9
8.
Installation ��������������������������������� 9
8.1
Wall mounting ������������������������������� 9
8.2
Control panel mounting ���������������������� 10
8.3
Electrical connection ������������������������ 10
9.
Specification ������������������������������� 11
9.1
Data table ��������������������������������� 11
9.2
Dimensions �������������������������������� 11
9.3
Connection example ������������������������ 11
GUARANTEE
ENVIRONMENT AND RECYCLING
OPERATION
1. General information
The chapter entitled "Operation" is intended for appliance
users and contractors.
The chapter entitled "Installation" is intended for contractors.
Note
Read these instructions carefully before using the ap-
pliance and retain them for future reference.
Pass on the instructions to a new user if required.
1.1
Safety information
1.1.1 Structure of safety information
KEYWORD Type of risk
Here, possible consequences are listed that may
result from non-observation of the safety infor-
mation.
f Steps to prevent the risk are listed.
8 |
1.1.2 Symbols, type of risk
Symbol
Type of risk
Electrocution
1.1.3 Keywords
KEYWORD
Description
DANGER
If this information is not observed, it will result in serious
injury or death.
WARNING
If this information is not observed, it can result in serious
injury or death.
CAUTION
If this information is not observed, it can lead to me-
dium or minor injury.
1.2 Other symbols in this documentation
Note
Notes are bordered by horizontal lines above and
below the text. General information is identified by
the symbol shown on the left.
f Read these texts carefully.
Symbol
Damage to the appliance and the environment
!
Appliance disposal
f This symbol indicates that you have to do something. The
action you need to take is described step by step.
1.3 Units of measurement
Note
All measurements are given in mm unless stated oth-
erwise.
2. Safety
2.1
Intended use
The relay box enables the connection of HE circulation pumps
in conjunction with heat pumps and ventilation appliances.
Any other use beyond that described shall be deemed inap-
propriate. Observation of these instructions and of instructions
for any accessories used is also part of the correct use of this
appliance.
WPM-RBS