Changing The Lamps - Proecotec ENERGY ONE ESK 10 Manuel D'utilisation

Installation

8. Changing the lamps

8.1
Disconnect the spotlight from the system or remove the fuse located behind the photovoltaic collector.
8.2
Remove the upper security ring by taking out the screws.
8.3
Remove the protective glass, handling it carefully so that it does not break.
8.4
Take out the LED lamp and replace it with a new one. Ensure you insert the new lamp correctly.
8.5
Reattach the protective glass, ensuring that the seal is correctly positioned.
8.6
Screw on the security ring of the protective glass using the screws provided.
8.7
Reconnect the spotlight with the system or screw the fuse back into place. Ensure that the system is fully functional.
P.S.: The following LED lamps can be used for the spotlight
LLGU53211 - LED LAMP 21 LED 1W MR16 WHITE (lamps used as default)
LLGU53013 - LED LAMP 1LED 3W MR16 WHITE
LLGU53031 - LED LAMP 3 LED 1W MR16 WHITE
28