Mounting The Spotlight - Proecotec ENERGY ONE ESK 10 Manuel D'utilisation

Installation

6. Mounting the spotlight

6.1 Take all the components out of the packaging and lay them on the table so that they are clearly visible.
Remove the rear mounting of the spotlight by taking out the 2 screws as shown in pict. 1. Keep these 2 screws in a safe place so
6.2
that they don't get lost.
Select the correct position and screw on the mounting of the spotlight tightly.
6.3
Insert the spotlight into the rear mounting and fix it with the 2 screws removed earlier.
6.4
Pict. 1
26
Pict. 2