Mitsubishi Electric SLZ-KF09 Manuel D'utilisation page 9

Select "Vane·Louver·Vent.
Main Main menu
(Lossnay)" from the Main menu
Vane·Louver·Vent. (Lossnay)
High power
(refer to page 8), and press the
Timer
Weekly timer
[SELECT] button.
OU silent mode
Main display:
Cursor Page
F1 F2 F3 F4
Press the [F1] or [F2] button to go
Fri
through the vane setting options:
Swing Off
"Step 1", "Step 2", "Step 3", "Step
4", "Step 5", "Swing" and "Auto".
Select the desired setting.
Vane Vent. Louver
F1 F2 F3 F4
Select "Swing" to move the vanes
up and down automatically.
When set to "Step 1" through "Step
5", the vane will be fixed at the
selected angle.
Press the [RETURN] button to go
Main Main menu
back to the Main menu.
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Main display:
Cursor Page
F1 F2 F3 F4
Step 1 Step 2 Step 3
Swing
Step 4 Step 5 Swing
Auto
Auto
-
-
For SLZ-KF .
DOWN air direction setting of remote controller.)
"Refrigerant address No." and "Unit No." are the numbers given to
each air conditioner.
"Outlet No." is the number given to each outlet of air conditioner.
(Refer to the illustration below.)
Reset 1 2
horizontal
Remote controller setting
-
tion setting of remote controller.
Electric Component box
Outlet No.4
Outlet No.3
3 4 5
Downward
Fixed
in particular direction.
* When it is cold because of direct
Outlet No.1
Outlet No.2
9