10. PROBLEMS AND SOLUTIONS
You can solve many simple problems with your wine cooler yourself, thus avoiding having to
contact your after- sales department. Try the following suggestions.
PROBLEM
Appliance is not
running
Appliance is not
cold enough
The compressor
starts and stops
frequently
LED lights do not
operate
Vibration
The appliance
makes a lot of
noise
The door does not
close properly
LED display is not
working properly
POSSIBLE CAUSES
Appliance is not plugged in
Appliance is not turned on
Check if voltage of the installation
Check the circuit breaker or if fuse has blown
Check the temperature control setting
Check if ambient temperature is beyond appliance operating temperature
The door is opened too frequently
The door is not closed properly
The door is not sealing properly
Insufficient free space around the appliance
The external temperature is high.
A large quantity of bottles has been put into the cellar.
The
appliance
The door is not properly closed.
The cellar has not been correctly set.
The appliance is not plugged in
The fuse has blown
LED lights are not broken
The light switch is off
Check and ensure that the appliance is level
A noise resembling circulating water is produced by the coolant gas and
this is normal.
At the end of a cooling cycle, you can hear the noise of water circulating.
Expansion and contraction of the internal walls may cause a cracking
sound.
The appliance is not level
Check if fan is in good condition
The appliance is not level.
The door seal is dirty or damaged.
The shelves are not positioned correctly.
A part of the contents is preventing the door from closing.
Control panel failed
Power PCB has broken
The appliance is not plugged in
The probe is not working
is
35
opened
frequently.