Lindy USB 3.0 Docking & Clone Station Premium Manuel Utilisateur page 4

Choose the HDD you want to delete.
Choose the algorithm for wiping out the data.
The erasing status is shown on the screen.
The erasing speed depends on the algorithm selected and the HDD
speed.
Click "Start" to delete the data.
Enter the verification code to be sure; you want to start the data erasure.
Troubleshooting
Standalone Cloning:
Standalone HDD Cloning creates a bit-by-bit clone of the source HDD
onto the target HDD. The target HDD must be of equal or larger capacity
than the source HDD. Make sure that the target HDD is not formatted or
partitioned.
The use of HDDs of 2TB and larger sizes and with new sector sizes of
4KB (Advanced Format) is limited! Usually it is not possible to clone an
old HDD (smaller than 2TB, with sector size 512) to a new, big HDD of
sector size 4K (or the other way round)! This also refers to SSDs, which
usually have sector sizes of 4KB. Even some hard disks > 2TB (from
different makers) still use the small sector sizes 512, i.e. Hitachi 3TB
hard disks. So please follow the information of the hard drive or SSD
maker. You can find more details on the Advanced Format on:
http://en.wikipedia.org/wiki/Advanced_Format
English