FlashCopy Function
FlashCopy allows for cloning twice as fast as standard Clone Stations.
Even via a USB 2.0 connection.
Install the source and target HDDs into the appropriately labelled bay
(Source and Target), connect the USB 3.0 HDD Docking & Clone Station
to your computer via USB 3.0 cable and press the power switch on. You
will then find a FlashCopy icon on the Desktop or task bar. Start the
program with a double click on the icon.
For first time installation, you will have to enter the serial number, which
you can find on a sticker at the bottom of the USB 3.0 HDD Docking &
Clone Station.
The process window will pop up and show detailed information
on the copy process.
When copying is completed, you can close the window.
After starting the program the data on both hard disks will be shown.
English
Select the folder of the source HDD, which you want to copy, and draw it
from the source to the target HDD.
Then click "Start" to activate the FlashCopy function.
DiskErase Function
The software DiskErase can delete all data on the hard disk securely and
permanently. DiskErase provides 18 different standard algorithms to wipe
out the data on the HDD:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. HMG IS5 (Baseline)
11. HMG IS5 (Enhanced)
12. Navso P-5329-26 (RL)
13. Navso P-5329-26 (MFM)
14. NCSC-TG-025
15. NSA 130-2
16. Bruce Schneier
17. Gutmann (35 times)
18. Schneier's 7 pass (7 times)
Once the data are deleted there is no way to bring them back!
Install the software DiskErase from the included CD. Then install the
HDD, which you want to delete, in the USB 3.0 HDD Docking & Clone
Station and connect it with the computer. Press the power switch of the
USB 3.0 HDD Docking & Clone Station on. You will then find a DiskErase
icon on the desktop or in the taskbar. Open the program with a double
click.
One Pass Zeros (1 pass).
One Pass Random (1 Pass)
US DoD 5220-22.M (3 Pass)
US DoD 5220.22-M (ECE) (7 Pass)
Canadian OPS-II
German VSITR
Russian GOST p50739-95
US Army AR380-19
US Air Force 5020
Deutsch