Restoring Default Settings - Motec MD3071A-V Notice De Montage Et D'utilisation

5.8

Restoring default settings

Selecting the "Default" function resets the settings for daytime and night time
EN
brightness, contrast and colour. It is recommended that you restore these set-
tings after, for example, replacing a camera and then optimise the image again
by making appropriate changes.
Note:
Resetting all the monitor settings to the factory settings (as delivered) is descri-
bed in the chapter "Expert Settings > Factory settings".
72
 Press the "On-screen menu" button.
The on-screen menu is displayed.
 Press the "Decrease" button and select the "Default settings"
line.
 Press the "On-screen menu" button to select "Default
settings".
This resets the settings.
 Press the "Decrease" button and select the "Exit" line.
 Press the "On-screen menu" button.
This exits the on-screen menu. If no buttons are pressed,
then the menu automatically exits after about 10 seconds.