Faults; Customer Information; Maintenance/Cleaning - Motec MD3071A-V Notice De Montage Et D'utilisation

13

Faults

If a nonfunction or error is detected during operation, normally the first thing to
EN
do is check the external circuit (fuse, power supply voltage, wiring, camera etc.).
If the malfunction or or the errors are clearly attributed to the monitor, so is this,
send it back together with a description of the fault and the RMA form (www.
motec-cameras.com/en/service/returns), to the factory.
14

Customer information

Motec GmbH
- Service -
Oberweyerer Str. 21
65589 Hadamar-Steinbach
GERMANY
15

Maintenance/Cleaning

The monitor is maintenance-free. Clean the monitor cover using a soft, slightly
moistened cloth. The ventilation slots of the monitor should occasionally be freed
from dust using a cloth or a brush. Do not remove the labels which identify the
product. In some cases legal provisions apply. In any case the information iden-
tifying the product with a precise designation and serial number is relevant for
tracking products and in the event of claims under the warranty.
100
Phone +49 6433 9145-9888
Fax +49 6433 9145-9877
service@motec-cameras.com
www.motec-cameras.com