Product Description; Important Information About The Product; Declaration Of Conformity - Motec MD3071A-V Notice De Montage Et D'utilisation

General information about operating instructions
Thank you for your confidence in Motec products.
Please read the operating manual in full and attentively before using the
product. It must be retained for later use. Our products are subject to continuous
further development. Motec GmbH reserves the right to make changes to the
product without prior notification.
1

Product description

The TFT monitor MD3071A-V is used for fullscreen display of up to 3 video
sources on vehicles and mobile machines. By connecting up to 2 cameras and
a video control unit, the driver - operator is able to see working areas which are
not directly visible. The video sources can be switched manually or using
control lines.
1.1

Important information about the product

Make certain based on the information on the monitor rating plate that the device
type matches these operating instructions. For further instructions, please con-
sult the operating instructions for the connected cameras or video control units.
1.2

Declaration of conformity

As the initial vendor within Europe, we have conducted an evaluation of con-
formity for our products in accordance with EU directives and legal regulations
based on the requirements of the relevant "harmonised standards". You will find
the CE mark on the product and also on the accompanying product documenta-
tion. We will be happy to provide you with a separate EC Declaration of Confor-
mity upon request.
If modifications are made to the device, compliance with the requirements of
EN
55