Cleaning And Maintenance; Safety Advice - Bartscher 200063 Mode D'emploi

WARNING! Hot surface!
The water tank gets very hot when in use!
To avoid burns to fingers and hands, do not touch hot surfaces of the device!
When using the device, touch only the handles and switches.
•
After you have finished using the device, turn the temperature dial to the „OFF"
position by turning it counterclockwise, then turn the device off using the ON/OFF
switch and remove its plug from the socket.
•
Wait for any remaining water in the tank to cool, then pour it into another
container.
•
The device is equipped with an overheating/dry heating protection function. If the
device is accidentally left on with too little or no water, this function will be activated
and the device will turn off automatically.
•
If the device is to remain unused for a longer period,
turn it off via the ON/OFF switch, remove its plug
from the socket and wait for it to cool.
After cooling, empty the tank and press the RESET
button at the rear of the device. The device can then
later be filled with fresh water and used again.

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power supply and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets.
Therefore, you must not use any kind of pressure water jet for cleaning the device!
- 26 -