Bartscher 200063 Mode D'emploi page 26

•
Connect the device to a single grounded outlet.
•
Set the desired temperature between 30 ° C – 100 ° C using the temperature dial.
•
Turn the device on using the ON/OFF switch.
•
The red working light will come on, then the water will be heated to the set
temperature.
•
After the set temperature is reached the red working light will go off. The green
heating light will come on and the water's temperature will be maintained.
WARNING! Danger of burns!
Never remove the lid while the device is heating!
The steam may cause burns to hands, arms and face!
•
Hot water can be used to prepare various beverages (tea, instant coffee, instant
soup, etc.).
•
Remember that various types of tea brew best at different temperatures. Follow te
manufacturer's instructions on the package.
• To pour hot water, place an appropriate container
(glass, cup, mug) under the spout. Press the
spout lever down and hold it until the desired
amount of water is poured.
When finished pouring, release the spout lever and
the spout will close automatically.
•
Monitor the tank's water level by observing the fill level indicator.
CAUTION!
Monitor the water level regularly and add waterr as needed.
Never operate the device without water!
•
Before adding water turn the device off, carefully remove the cover, then pour in more
water.
- 25 -