Media Player - BST NOTOS800 Manuel D'utilisation

4 • NOTOS800
Rotate to set the volume of the low frequencies
11. PHASE selector switch
Set the phase to 0° - 180°
12. MULTIMEDIA volume control
Set the volume of the multimedia player
13. SUBWOOFER crossover frequency selector
14. MULTIMEDIA player
Use these controls for your Bluetooth and MP3 audio sources
MEDIAPLAYER
1. MODE BUTTON
Simple press allows you to choose the play-
back support : SD, USB or Bluetooth
2. PLAY / PAUSE BUTTON
This button is used to start the playback or to
enter in pause mode.
3. Remote control sensor
4. >>| NEXT
Use this button to select the next track.
5. |<< PREVIOUS
Use this button to select the previous track.
6. REPEAT button
7. LCD DISPLAY
The LCD display shows you some information as playback support, file name, elapsed time, total time, file
number, total file numbers, file system ( MP3 or WMA ) and playback mode ( Repeat one, repeat all, or
random. )
Note : In Bluetooth mode, the LCD display shows only the connection status (connected or disconnected).
All playback information is on the Bluetooth device.
8. USB SOCKET
Connect your USB key to this slot.
Note : Before you eject the USB key, please set the playback in pause mode or select another playback support (SD card or Bluetooth).
9. SD CARD SLOT
Connect your SD card to this slot.
Note : Before you eject the SD card, please set the playback in pause mode or select an other playback support ( USB or Bluetooth )
Please note: The USB/SD inputs accept up to 32Gb memories.
Use of the Remote Control
Please operate the remote control within a distance of 2m and 30° between the remote and the appliance.
Aim the remote at the sensor. Remove all obstacles between the remote and the sensor.
The remote control might not work properly if the sensor is exposed to strong sunshine.
If the remote control doesn't work properly, please check the batteries.