Mains Input - BST NOTOS800 Manuel D'utilisation

• Built-in limiter
• Subwoofer, Master & MP3/BT volume controls
• Adjustable subwoofer cut-off frequency
• Audio sources : LINE / USB / BT / SD
• Line inputs via 6.35mm Jack, RCA & JACK/XLR Combo
• Line outputs via RCA & XLR
• 2x 4m SPEAKON leads
®
• 2 x speaker stands
• Sturdy wooden case with black acrylic varnish
Connectors & Controls
1. ON/OFF switch
Put all controls down to the
minimum prior to switching
the unit on.

2. MAINS INPUT

Connect the unit to a suitable
mains outlet with earth con-
nector delivering a voltage of
110/240V~ 50/60Hz.
3. VOLTAGE SELECTOR
SWITCH: Set this switch to
110V or 240V depending on
your mains voltage.
4. SPEAKON output connector
Connect the right and left
channel to the left and right
inputs of passive speaker
boxes
5. XLR output connectors
Connect the right and left
channel to the right and left
inputs of an amplifier or ac-
tive speaker box.
6. XLR/6.3 JACK input connector
Connect this balanced input to an external audio source
7. RCA input connector
Connect these RCA connectors to an external audio source
8. 3.5mm input Jack
Connect to an external audio devices fitted with a 3.5mm Jack plug
9. MASTER volume
Rotate to set the overal volume level of the system
10. SUBWOOFER volume control
NOTOS800 • 3