ARDES AR8U10 Mode D'emploi page 7

If you decide you do not want to use this appliance any longer, disable it by cutting the power
cable - of course, after disconnecting it from the socket.
The power cable should be extended to its full lenght to avoid over heating.
For safety reasons, the appliance should never be opened.
The appliance has been designed and manufactured to operate as a humidifier in the home.
Any other use is considered inappropriate and dangerous.
Do not use the appliance out of doors.
Do not direct the steam jet against people, objects or the walls.
Take care never to turn the appliance upside down while it is in use.
Place the appliance on a fiat surface during use.
Even if the appliance runs dry, this does not damage it nor does it consume power.
In order to avoid irreparable damage to the appliance and malfunctioning, never pour any
other substance than water (e.g. salt) into the reservoir. If this should be done by mistake,
rinse it out at once with tap water.
Do not direct the flow of steam towards electrical appliances, or other materials (eg., Mobile)
not resistant water or humidity.
(see drawing at the end of the booklet)
1 - Nozzle
2 - Head cover
3 - Handle
4 - Water tank
5 - Water tank cover
Remove the water tank, turn it upside down, open the cover by turning counter clockwise
and fill the tank with clean water (cold water, 40°C max, previously boiled).
Close the tank and place it over the base carefully. Settle the nozzle and top cover on top.
Pressing the operation button, it will light up in fuchsia and the humidifier will start to steam;
each pulse will increase the speed the button will change color from fuchsia to green
(medium speed) and blue (top speed).
When the water finishes, the button turns red and the unit is beeping 5 times.
(see drawing at the end of the booklet)
1 - Nozzle
2 - Head cover
3 - Handle
4 - Water tank
5 - Water tank cover
6 - Hygrometer.
Remove the water tank, turn it upside down, open the cover by turning counter clockwise
and fill the tank with clean water (cold water, 40°C max, previously boiled).
Close the tank and place it over the base carefully.
Settle the nozzle and top cover on top. Plugging the unit, the temperature appears on the
display.
Press the operation button (A), the device will start emitting steam continuously; pressing
the button for the steam control (B), you can vary the intensity of the steam up to 4 levels.
During continous operatios, it is possible to set the AUTO function. The appliance detects
automatically the suitable humidity level related to the ambient temperature and it sets the
nebulization speed:
- high speed if the air humidity is less than suitable level;
Instructions for use AR8U10
6 - Bowl
7 - Transducer
8 - Operation button /
speed delivery
9 - Filter
Instructions for use AR8U20
7 - Bowl
8 - Transducer
9 - Internal lamp
10 - Display
11 - Operation button
12 - Aroma box
7 / 28