To Project Images And Load The Image Cartridge - Munchkin MKNU0665 Manuel De L'utilisateur

TO PROJECT IMAGES AND LOAD
THE IMAGE CARTRIDGE
To load the Image Cartridge, the Projector
must be turned off. To turn the Projector
off, press the PROJECTOR button once.
1. Select the Cartridge you wish to play.
2. Rotate the Projector to access the cartridge
loading slot.
3. Slide the Locking Slider down to load
the Cartridge.
4. Make sure the cartridge is inserted right
side up with the arrow on the cartridge
facing away from the Locking Slider.
NOTE: Cartridge may get permanently
stuck if loaded into the unit incorrectly.
5. Once the Cartridge is loaded make sure that
the Locking Slider is pushed up in a locked
position or the Cartridge won't play.
6. Turn on the Projector system by pressing the PROJECTOR button.
7. Rotate the angle of the Projector to project onto the wall or the ceiling.
8. When finished, turn off Projector by pressing the PROJECTOR button.
9. You can conveniently store Cartridges in the compartment on the back of the unit.
NOTE: If the Cartridge you wish to play is already loaded, simply turn on the Projector
by pressing the PROJECTOR button and adjust the Projector angle as needed.
How to Use
Locking
Slider
9