Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1
Notes on documentation
This installation and short user guide is intended for experienced trained specialists and contains
only the most important information concerning the assembly, installation and function of the CMC III
Coded Lock VX (subsequently called coded lock).
1.1
Other applicable documents
CMC III coded lock VX assembly, installation and user guide.
It is available at www.rittal.com and contains the complete application-relevant information and tech-
nical data for the coded lock with regard to:
– Further assembly possibilities
– Functions
– Configuration possibilities
– Detailed operating instructions
– Troubleshooting
2
Safety instructions
– Assembly and installation of the coded lock may only be performed by experienced trained special-
ists.
– The coded lock housing must not be opened.
– The coded lock must not come in contact with water, aggressive or inflammable gases and va-
pours.
– The coded lock must only be operated within the specified environmental conditions (see sec-
tion 3.4).
3
Product description
3.1
Functional description
The coded lock is used to release enclosure or room doors when a numerical code is entered.
The numerical code is checked in the connected CMC III PU or PU Compact and, if validated, an
appropriate door release initiated. The coded lock has an identification that allows it to be detected
automatically by the CMC III PU or PU Compact.
3.2
Proper use
The CMC III coded lock VX is used only for the door release when a numerical code is entered. It may
be used only together with the CMC III PU or PU Compact and the Access Control (DK 7030.202) or
DCM (DK 7030.501). Any other use is not permitted.
3.3
Scope of delivery
– CMC III coded lock VX
– Accessories supplied loose (fig. 1)
– Installation and Short User Guide
Rittal CMC III coded lock VX
Notes on documentation, Safety instructions, Product description
EN
7
Publicité
Table des Matières
