Parts List - Cembre PNB-1 Notice D'utilisation Et Entretien

– Insert the conductor into the connector.
– Insert the connector/conductor assembly through the opening in the side of the safety guard
and without exerting any pressure position the connector up against the positioner.
– Depress the manual control (26) to operate the press.
– Remove the crimped assembly.
6.2) Connectors requiring front access dies
– Insert the conductor into the connector
– Insert the connector/conductor assembly through the opening in the front of the safety guard
into the appropriate aperture of the bottom die until the collar of the barrel is in contact with the
die itself.
– Depress the manual control (26) to operate the press.
– Remove the crimped assembly.

7. PARTS LIST

(Ref. to Fig. 10)
Code N° Item
6232166 01 LABEL (TG. 0366)
6895086 02 AIR ON-OFF VALVE
6072016 03 LONG CONTROL ROD
6895085 04 CONTROL FEED VALVE
6072015 05 SHORT CONTROL ROD
6790024 06 LOWER DIE CLAMP
6780365 07 LOWER DIE SUPPORT
6504126 08 POSITIONER
6240170 09 WIRE TERMINAL EXTRACTOR
6790024 10 UPPER DIE CLAMP
6090576 11 UPPER DIE SUPPORT
6780363 12 MAIN SUPPORT
6800063 13 TRANSPORTATION CAP
6800062 14 OIL FILLER CAP WITH DIPSTICK
6250047 15 REDUCTION UNIT FILTER
6895087 16 MAIN AIR VALVE
6631024 17 PU-1 GUARD
6631029 18 PK-1 GUARD
6631022 19 ME-1 GUARD
6631023 20 MNRF-1 GUARD
6760166 21 CYLINDRICAL PIN
6650052 22 COUPLER
6480659 23 KNOB
6650058 24 MALE COUPLER
6650066 25 MALE CONNECTOR
6550053 26 COMPLETE MANUAL CONTROL
6890032 27 PU 4 HOSE
6650064 28 MALE COUPLER
6650062 29 MALE CONNECTOR
7
DESCRIPTION
The guarantee is void if parts used are not
Qty
CEMBRE original spares.
1
1
When ordering spare parts always specify
1
the following:
1
- code number of item
1
- name of item
1
- type of tool
1
- tool serial number
1
1
1
1
1
1
1
1
1
1
1
1
1
4
3
1
1
1
1
3 m
1
1
ENGLISH