General Recommendations - M Confort CF 2000 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. GENERAL RECOMENDATIONS
Infrared halogen heaters emit waves that pass through the air without heating
it. They only heat the objects on which they affect, so they do not dry out the
environment and are very efficient, since they manage to save up to 40% of
energy compared to other heating systems.
For efficient operation, keep the following recommendations in mind:
1. Use this heater indoors or outdoors. Avoid exposing the equipment
to sources of water and dirt.
2. Prevent dirt from accumulating on the reflective screen. A clean
screen ensures that all the energy emitted by the lamp is properly
focused and produces efficient heating.
3. Before turning on the heater, make sure the lamp is clean. Espe-
cially in marine environments, after a period of inactivity, saltpeter
can accumulate in the lamp. This can instantly damage the lamp
when you turn it on. If you notice any type of dirt embedded in the
lamp, please contact the technical service before turning on the
heater.
4. When installing the heater on the ceiling, avoid doing it parallel to
NO
the floor, as there is an excessive concentration of heat in the reflec-
tor, which can damage the equipment.
Therefore the heater must be installed with an inclination of approxi-
mately 45º.
YES
5. Infrared halogen heaters produce immediate heat and do not
require preheating. Turn off your heater when not in use to save even
more energy.
ON-OFF
6. If you have any doubts that may arise, do not hesitate to contact
?
our technical service, we will be happy to help you.
03

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

PowerWaveWave stand

Table des Matières