Connecting Usb Devices - Sony VAIO VGP-UPR1 Mode D'emploi

Connecting USB devices

Before connecting USB devices such as printers,
installation of the drivers supplied with the device
may be necessary.
For more information, refer to the instruction
manual supplied with the connecting device.
1
Connect the device to the  USB
connector.
Notes
Do not connect a USB hub to the product.

Depending on the printer, a screen to select the printer

cable or printer port may appear during the driver
installation. In this case, select the USB cable or USB
port.
If multiple USB devices are connected, the printer

speed may decrease as a characteristic of the USB.
Depending on the printer, the status monitor, remote

panel, etc., of the utility supplied with the printer
driver may be unusable. Contact the manufacturer of
the printer.
If a printer that is not Windows Vista-compatible is

connected, it may not function properly.
When disconnecting a USB speaker, etc., stop

playback of DVD, music, etc., or turn off the power of
the devices before disconnecting. If the device is
disconnected during playback, it may cause a
malfunction. For the procedure for disconnecting USB
devices, refer to the instruction manual supplied with
the device.
To avoid malfunctions of this product or USB device,

be sure to follow these precautions.
– When moving the product with USB devices
connected, avoid applying pressure or impact to the
USB connector.
– Do not put the product in a bag or carrying case
with USB devices connected.

Tips
The USB connector of this product corresponds to

USB 2.0.
USB 2.0 is a new addition to USB (Universal Serial

Bus) and is capable of more rapid data transfer
compared to USB 1.1. Connectors that correspond to
USB 2.0 can also be connected to devices that
correspond to USB 1.1.
USB 2.0 has three transfer modes.

– High-speed: Fastest transfer mode of 480 Mbps.
– Full-speed: Transfer mode of 12 Mbps.
– Low-speed: Transfer mode of 1.5 Mbps. Used for
low speed devices such as a mouse, keyboard, etc.
9
GB