Sony VGP-PRBX1 Mode D'emploi

Multi Function Bay
Docking Station
VGP-PRBX1
Operating Instructions / Mode d'emploi /
Manual de instrucciones
2-655-414-14(1)
© 2005 Sony Corporation Printed in China
English
WARNING
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
• Use your product only with the AC adapter supplied with the unit.
• To disconnect it completely from the main voltage, unplug the AC
adapter.
• Make sure that the socket outlet is easily accessible.
For customers in the USA
Owner's Record
The model number and serial number are located on the bottom of your docking
station. Record the serial number in the space provided here. Refer to the model and
serial number when you call your Sony Service Center.
Model No. VGP-PRBX1
Serial No. ___________________
WARNING
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference using one or more of
the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this
manual could void your authority to operate this equipment.
Only peripherals (computer input/output devices, terminals, printers, etc.) that
comply with FCC Class B limits, may be attached to this computer product. Operation
with non-compliant peripherals is likely to result in interference to radio and television
reception.
All cables used to connect peripherals must be shielded and grounded. Operation with
cables, connected to peripherals, that are not shielded and grounded, may result in
interference to radio and television reception.
If you have any questions about this product, you can reach the Sony Customer
Infomation Service Center at 1-888-476-6972 in the United States or 1-800-961-7669 in
Canada; or write to the Sony Customer Information Service Center at 12451 Gateway
Blvd, Ft. Meyers, FL 33913, or find Sony Customer Service on the Web at
http://www.sony.com/pcsupport.
Declaration of Conformity
Trade Name: SONY
Model No.: VGP-PRBX1
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego,
CA 92127 U.S.A.
Telephone No.: 858-942-2230
(This phone number is for FCC-related matters only.)
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
For customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
• VAIO and are trademarks of Sony Corporation.
• Intel is a trademark of Intel Corporation.
Before use
Before using the docking station, please read this manual thoroughly and retain it for
future reference. See also the manuals provided with your computer for more
information about connecting the docking station.
The Sony VGP-PRBX1 docking station is designed for Sony personal computers.
However, it may not be used with some models.
Specifications
Connectors Docking station connector
Custom connector (1)
USB
1
Type-A connector (4) *
Serial port
RC-232C, D-sub 9 pin (1)
Printer port
D-sub 25 pin (1)
External display output
MONITOR ( a ) : Analog RGB, VGA type, D-sub 15 pin (1)
DVI-D ( ) : DVI connector (1) * 2
LAN connector * 1
LAN (10BASE-T/100BASE-TX/1000BASE-T) (1)
Battery charge connector
Custom connector (1)
Multi function bay
Dedicated slot (1)
Power requirement (AC adaptor * 3 )
Input
100 to 240V AC (AC power cord supplied)
VGP-AC19V17 : 2.0 A, 50 - 60 Hz
VGP-AC19V18 : 2.0 A, 50 - 60 Hz
VGP-AC19V9 : 2.0 A, 50 - 60 Hz
Output voltage
19.5 V DC
Output current
7.7 A max.
Operating temperature
41°F to 95°F (5°C to 35°C) (temperature gradient less than 18°F
(10°C)/hour)
Operating humidity
20% to 80% (not condensed), provided that humidity is less than
65% at 95°F (35°C) (hygrometer reading of less than 84°F (29°C))
Storage temperature
–4°F to 140°F (–20°C to 60°C) (temperature gradient less than 18°F
(10°C)/hour)
Storage humidity 10% to 90% (not condensed), provided that humidity is less than
20% at 140°F (60°C) (hygrometer reading of less than 95°F (35°C))
Approx. 12.9 (w) × 2.4 (h) × 12.1 (d) inches
Dimensions
(Approx. 326 × 59 × 305 mm)
Mass Approx. 60.4 oz. (1.7 kg)
Supplied accessories
AC adaptor (1)
Power cord (1)
Warranty (1)
Operating instructions (1)
Accessories (not supplied) * 4
Rechargeable Battery Pack VGP-BPS4A/VGP-BPL4A
* 1 The specifications are the same as those of the computer you are using. For details,
refer to the manuals provided with your computer.
*2 This connector cannot be used if your computer processes graphics with an Intel
Graphics Media Accelerator.
*3 Be sure to use the AC adapter supplied with the unit. The AC adapter supplied
vary depending on the country or region.
– USA, Canada, and Latin American countries or regions:VGP-AC19V17 or VGP-
AC19V9
– All other countries or regions: VGP-AC19V18 or VGP-AC19V9
The AC adapter supplied with your computer is not compatible.
*4 For details on which computer or rechargeable battery pack is compatible, refer to
"Note to VGP-PRBX1 Users".
Design and specifications are subject to change without notice.
Notes on use
• Use the AC adapter supplied with the unit. The AC adapter supplied vary
depending on the country or region.
– USA, Canada, and Latin American countries or regions:VGP-AC19V17 or VGP-
AC19V9
– All other countries or regions: VGP-AC19V18 or VGP-AC19V9
• To disconnect the unit completely from the main voltage, unplug the AC adapter.
• Make sure that the socket outlet is easily accessible.
• Do not place the unit in locations that are:
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Vibrating
– Subject to strong magnetic fields
– Sandy
– Subject to direct sunlight
• Do not apply mechanical shock or drop the unit.
• Make sure that nothing metallic comes into contact with the metal parts of the unit.
If this happens, a short-circuit may occur and the unit may be damaged.
• Do not operate the unit with a damaged cord.
• Do not operate the unit if the unit itself has been dropped or damaged.
• Always keep the metal contacts clean.
• Do not disassemble or convert the unit.
• While in use, it is normal for the unit to get warm.
• Keep the unit away from TV or AM receivers, because it can disturb TV or AM
reception.
• USB, i.LINK, PC-card slot, Printer, DVI-D and MONITOR are not supplied with
Limited Power Sources if those connectors are provided.
• When connecting or disconnecting the unit, handle it carefully.
• When transporting the unit, prevent foreign objects from causing a malfunction by
using the battery pack, the connector covers and the supplied slot protectors if
there is any.
• When transporting your computer, be sure to remove the unit first. Moving your
computer with the unit installed could cause the unit to fall off, resulting in
personal injury, or damage to the unit or your computer.
• If there are any dust or dirt particles on the docking station connector, your
computer may not be able to detect the docking station when it is connected (even
if the particles are invisible to the eye).
If the connection seems to be poor, remove the AC power adaptor and battery, and
wipe off the connector and the area around it on both the computer and the unit.
Commercial air dusters are also effective for blowing away residual dust and dirt.
Be careful not to damage the connectors while cleaning them.
On cleaning
Clean the unit with a soft dry cloth or a soft cloth lightly moistened with a mild
detergent solution. Do not use any type of solvent, such as alcohol or benzine, which
may damage the finish.
Français
AVERTISSEMENT
Afin de réduire les risques d'incendie ou de choc électrique,
n'exposez pas cet appareil à la pluie ni à l'humidité.
Pour prévenir tout risque d'électrocution, n'ouvrez pas le
boîtier. Confiez l'entretien exclusivement au personnel qualifié.
• N'utilisez votre produit qu'avec l'adaptateur secteur fourni avec l'appareil.
• Pour déconnecter complétement votre ordinateur de l'alimentation
secteur, débranchez l'adaptateur secteur.
• Assurez-vous que la prise secteur est facilement accessible.
Pour les utilisateurs au Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
• VAIO et sont des marques commerciales de Sony Corporation.
• Intel est une marque commerciale de Intel Corporation.
®