Sony VAIO VGP-UPR1 Mode D'emploi page 7

Disconnecting the product
Note
When disconnecting the product from the personal computer, confirm that the connected devices can be disconnected

safely.
1
Exit the software being used by the USB device connected to the product.
2
Disconnect the USB connector connected to the personal computer.

If a USB HDD or USB memory is connected
1
Click "Safely Remove Hardware" on the taskbar.
The "Safely Remove Hardware" screen will appear.
2
After selecting "USB Mass Storage Device" in the "Safely Remove Hardware" screen, click
"Stop. "
The "Stop a Hardware device" screen will appear.
3
Select the "USB Mass Storage Device" connected to the product, then click "OK. "
The "Safe To Remove Hardware" screen will appear.
4
Click "OK. "
Prepared for disconnection.
5
After the POWER lamp or Access lamp of the connected product turns off, disconnect the
product.

GB