Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
display the set temperature, and 3 seconds later, it will recover and
display the actual temperature.
b. Preset Temperature
The beer cooler has 6 preset temperatures.
Press and hold "-" button, it enter the 6 preset temperatures, then
you can press "-" button to choose a certain preset temperature, 40
℉(4℃),
46℉(8℃),
54℉(12℃).
Press and hold "+" button, the unit can achieve conversion between
Fahrenheit and Celsius.
Adjust the CO2 pressure regulator knob to "+" position, to pour
9.
the beer out by pulling down the tap mechanism about 45°, and
you can adjust the pressure regulator knob to control the beer
flow rate and beer bubble; (Figure 13)
Note: Clean the glass before pouring beer out; if the beer or beer
cup/glass is in high temperature or the beer is not cool enough,
there are many bubbles when pouring beer out;
10.
When taping the beer, lean your beer glass against the pouring
spout and slowly straighten it up with the beer rising, open the
tap mechanism completely to avoid much bubble; It is advisable
to pour half-glass, make a short pause before continuing the
rest. NOTES: Never immerse the pouring spout into the beer
glass to avoid much bubble; Remember to lock the tap after
finishing pouring.
48℉(9℃),
50℉(10℃),
14
52℉(11℃)
and
Publicité
Table des Matières
