Operating Determinations - SX Lighting PL ZOOM Manuel D'utilisation

power-cord by the plug. Never pull out the plug by tugging the power-cord.
Please note that damages caused by manual modifications on the device or unauthorized operation
by unqualified persons are not subject to warranty.
Keep away children and amateurs!
There are no serviceable parts inside the device. Maintenance and service operations are only to be
carried out by authorized dealers.

OPERATING DETERMINATIONS

This device is a switching panel for switching other devices like lighting effects or spots in
discotheques, on stages etc. This product is allowed to be operated with an alternating current of 230
V, 50 Hz and was designed for indoor use only.
Do not shake the device. Avoid brute force when installing or operating the device.
You can install the device at any desired place in dry rooms. Please make sure that the device is not
exposed to extreme heat, moisture or dust. There should not be any cables lying around. You
endanger your own and the safety of others!
Do not operate the device in extremely hot (more than 30° C) or extremely cold (less than 5° C)
surroundings. Keep away from direct insulation (particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
Never use the device during thunderstorms. Over voltage could destroy the device. Always
disconnect the device during thunderstorms.
This device must only be operated in an altitude between -20 and 2000 m over NN.
Never use the device during thunderstorms. Over voltage could destroy the device. Always disconnect
the device during thunderstorms.
The symbol -�-�-m determines the minimum distance from lighted objects. The minimum
distance between light-output and the illuminated surface must be more than 1 meter.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
Always fix the device with an appropriate safety bond.
The maximum ambient temperature T = 45° C must never be exceeded.
Operate the device only after having familiarized with its functions. Do not permit operation by persons
not qualified for operating the device. Most damages are the result of unprofessional operation! Never
use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
If this device will be operated in Please consider that unauthorized modifications on the device are
forbidden due to safety reasons!
If the device will be operated in any way different to the one described in this manual, the product may
suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to
dangers like short-circuit, burns, electric shock, lamp, explosion, crash etc.