Brother Premium pakket I Guide D'installation page 14

Installation Procedure (Using Wireless LAN)
a
Check that the machine software is version 2 or later.
If the machine software is earlier than version 2, certify the kit
according to the procedure in "Installation Procedure (Using
Computer and USB)" on page 3.
b
Confirm that your machine is connected to wireless LAN.
c
Press
d
Press the Kit number you are working with to certify.
e
Press
f
Using a coin etc., gently scrape the hiding seal off the
"Activation Card".
g
Type in the 16-digit number written in the activation card to
h
Certification has been completed when the success message
appears in the screen. Turn off the machine and then turn on
again.
i
Confirm that there is a check mark beside the Kit number in the
Settings screen.
j
Go to the following web page.
http://s.brother/cpdab/
k
Click "Manuals", and then download the following documents
listed under "User's Guide for Optional Accessories".
• Operation Manual
• Embroidery Design Guide
• Operation Manual Addendum
12
in the Settings screen.
.
, and then press .