Troubleshooting - Clevo N350TW Guide Utilisateur Concis

Troubleshooting

Problem
The Wireless LAN/Bluetooth
modules cannot be detected.
The PC Camera module cannot be
detected.
The computer is off (or in Sleep Mode)
but powered by the AC/DC adapter
plugged in to a working outlet or
powered by the battery with a capacity
level above 20%. I have plugged a
device into the powered USB port in
order to charge it, but the device is
not charging.
24
Possible Cause - Solution
The modules are off as the computer is in Airplane Mode. Check the LED indicator
to see if it is in Airplane Mode (see
combination to toggle Airplane Mode on/off (see
The module is off. Press the Fn + F10 key combination in order to enable the module
(see Table 2 on page 10). Run the camera application to view the camera picture.
The port is not powered on. Toggle power to the port using the Fn + Power Button
combination.
This function may not work with certain external USB compliant devices (check your
device's documentation). If this is the case, power the computer on and connect
the external USB device in order to charge it.
Table 1 on page 8). Use the Fn + F11 key
Table 2 on page 10).